3 piece, Hot end set. P100 style plated Copper Block, Cartridge thermistor 290c 1%, 50w Cartridge Heater.

P100 style Plated Copper Volcano block, 100k 3950 Cartridge Thermistor, 290c 1% & 50w heater cartridge.

Correct connectors. suit X1 & Genius. THIS is the newer P100 block,

not suitable for original Evnovo thermistor

The thermistor will work as is to the standard 260c, plug and play.

But for best perfomance it requires a Marlin thermistor settings change. thermistor line from 1 to 13. and if you want 290c then you need to change max temp in the firmware to 310c (marlin has a 15-20c buffer)

Marlin

*13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"

#define TEMP_SENSOR_0 13

https://github.com/MarlinFirmware/Marlin/blob/1.1....

(for best results we recommend doing a PID tune)

We recommend doing a PID tune.

For X2 or Gpro you may need to file the ABL SENSOR Plastic mounting bracket holes into slots to give adjustment.